How to Cut a Fade Haircut: A Step-By-Step Guide

How to Cut a Fade Haircut: A Step-By-Step Guide

How to Cut a Fade Haircut with the Right Tools and Products. Fades look great on every face shape and hair type. In this article, we will tell you step by step.

A faded haircut is one of the most popular hairstyles among men and boys, whether they want to keep their hair long or cut it short.


Step 1: Create the Top Section


The pinnacle segment of your hair is what is going to be left longer. Go ahead and discover wherein you need the lengthy piece to give up and deliver a spritz of water along with your spray bottle.

This helps you comb it out of the way because it won't be reduced with clippers. If you've got a clip, it's beneficial to clip the pinnacle segment out of the way for now.

Otherwise, ensure the hair on the pinnacle remains out of the way simultaneously as you figure on the perimeters and back. Wrap a towel or cape across the neck and shoulders to maintain hair from your garments and stale the channel as you gather.


Step 2: Start With the Shortest Clipper Guard


The pinnacle phase of your hair is what's going to be left longer. Go beforehand and locate wherein you need the lengthy degree to cease and provide it a spritz or of water together along with your spray bottle.

This enables you to comb it out of the way because it won't be reduced with clippers. If you've got a clip, it's beneficial to clip the pinnacle phase out of the manner for now.

Otherwise, ensure the hair on the pinnacle remains out of the way while you figure on the edges and back. Wrap a towel or cape across the neck and shoulders to preserve the hair from your garments and prevent the neck from becoming as vile as you might imagine.

Starting from the lowest part of the hairline and approximately 1 to one ½" inches upward, use a vertical in-and-outward movement (a C form) to reduce that horizontal strip of hair.

Stylist Tip: You need to be coming in with the clippers, gliding them briefly upward in opposition to the head, then flicking outward as you attain the pinnacle of the phase you're slicing as you flow the clippers across the head. It's more or less a C-shaped movement. This leaves the hair on the pinnacle of this phase a touch longer, so it seamlessly fades into the following period.

Now, regulate your lever upward a bit (now no longer all of the manners) to, in part, shorten the taper. This time, use your C-form movement to are available in and flick outward, preventing approximately midway up the quick phase you reduce.

Finally, near that lever absolutely with the aid of adjusting it as some distance upward because it will go. Do quick little upward flicks simply at the very backside of the hair. If you'd like the bottom to be dwindled out absolutely to the skin, you may do away with the clipper defend and do the upward flicks with a gentle hand on the backside.

Stylist Tip: The taper lever is a first-rate way to get a more excellent seamless fade and a custom-designed haircut. When you snap a clipper defend on for the primary pass, ensure that the lever is all manner open – supplying you with the most extended period – after which do more incredible passes. 

For the 2d pass, near the lever midway for a medium period on that defend and best reduce midway up the phase you're running on. 

For the third and last pass, near the lever, get the shortest defense period. Do quick, managed flicks upward on the lowest part of the phase you're running on. This step-by-step transitions the period of the hair higher than the usage of the uncooked defend period for the complete degree.


Step 3: Use the Medium Guard


You'll use the mid-period shield (or guards) to mix into your reduced fast backside segment. Again, remember that the taper lever will initially be open for the primary pass.

If you commenced with a #1 shield, you'd now snap on a #2. If you started with a #2 on the lowest, seize your #three shield and snap it into place. You're going to do the same element right here as you probably did within the closing step. 

Come in with the clippers in a C-form motion (taper degree open all manners) and waft upward for approximately 1″ to at least one ½". Move around the top of that horizontal strip identically, inward, upward, and flicking outward. 

Adjust your taper lever upward midway to get a barely shorter period, and on the second pass, the handiest arises approximately halfway within the segment you've reduced. 

For the third pass, flow the lever upward to shut it (for the shortest period) and flick it upward in small, tight moves at the lowest of this newly reduced segment.


Step 4: Use the Longest Guard


The hair should now be diminished midway, with the lowest and mid-segment of the pinnacle completed. It's time to seize your longest clipper shield to do the pinnacle segment of the fade.

We're no longer touching the lengthy hair on a pinnacle. Snap-on your #three or #four shield (one length up out of your closing shield) and open that lever all of the manners once more with the aid of adjusting the cope with downward.

Make sure the lengthy segment on the pinnacle is absolutely out of place and that you're satisfied with where the pinnacle segment ends. Use the C-form movement to return in, float upward to the brink of the pinnacle segment, and flick outward on the pinnacle.

Move around the pinnacle using this identical movement. Doing the lower back may be tricky if you're slicing your hair. Do the best you can, or ask a friend who will help you out with the lower back segment.

Adjust the upward lever midway, then come around the pinnacle with the C-shaped movement approximately midway up this more extended segment. Then, flick outward.

Adjust the lever upward for the shortest period in this shield and make quick, mild flicking motions upward at the very backside of this lengthy segment.

At this point, your hair ought to be well diminished from the shortest period at the lowest to the extended period close to the pinnacle. All that's left to do is transition the height cleanly into the diminished facets and lower back and trim the model if needed.


Step 5: Clean Up the Transition Line


The transition line wherein the more extended pinnacle phase of the hair meets up with the now-diminished facets is essential to get right. You can go away with it as-is if you'd like a stark assessment of the period. But many opt to provide it a mild taper to combine it better.

There are methods to do this. If you're very cozy with the clippers and feature mastered that C-form swooping motion, you could manually combine the rims by swooping in a fragment of an inch and flicking outward on the edges of the lengthy phase.

Be cautious no longer to get close to the scalp or cross too deep to the pinnacle phase! If you'd alternatively have a bit manual while you combine the sections, take hold of a comb.

The comb will assist you to keep the hair reduced far from the pinnacle, so simply the suggestions may be buzzed off. Read the stylist's tip underneath to discover ways to flawlessly taper the model into the edges and lower back with a comb.

Stylist Tip: Use a comb to flawlessly transition the lengthy hair on the pinnacle into the shorter hair at the lower back and facets. Start at the brink of the more extended phase on the model and insert the enamel of a fine-toothed comb on the scalp.

Pull the brush upward to the length you want (begin with an extended period; you could constantly take off more if needed). Then, tilting the brush barely outward to keep away from a blunt edge, run your clippers over the pinnacle of the meeting.

Repeat for the relaxation of the hair around the rims of your more extended pinnacle phase. This creates a perfect, tapered transition. If the hair on the pinnacle wishes for a trim, you could take hold of your scissors (the sharper, the better) or use the brush-and-clipper approach to get a continuous period.



A "Hi-Top Fade" or "Faded" haircut is very quick on the bottom and, step by step gets longer and closer to the pinnacle of the head. Whether you need to save a little cash on haircuts or are interested in slicing hair, you may discover ways to make a fade reduction effortlessly with the proper equipment and a chunk of practice.




What is a "1 fade"?

The number one fade is a fashion in which the hair at the back and facets is reduced very briefly to approximately 3 mm. Step by step, the period of the hair receives longer as you pass up the perimeters and again. It took its call from the quantity of the clipper to protect you need to use to create the fashion (Number 1 protect = 3mm).


What is a drop fade haircut?

"A drop fade is much like a regular fade haircut. However, it steadily lowers in the back of the pinnacle and across the front hairline," says Katie Conlon, stylist at Topman's resident barber, Johnny's Chop Shop. "This lets in extra intensity across the crown and gives a pointy definition to the face."


Is it hard to fade your halogens? Recommends achieving something for your barber that will help you through it.

A fade is a haircut that includes hair tapering from more extended at the pinnacle to shorter toward the nape of the neck. The technique may be extra hard for you to try on it.


How to Cut a Fade Haircut: A Step-By-Step Guide

The fade haircut is a popular, flattering fashion in which the hair is reduced quickly close to the temples and neck and regularly given longer close to the pinnacle of the head. Depending on the hair and private fashion, fades may be excessive and trimmed or begin to decrease and mix into the neckline. Even if you've got in no way diminished hair before, slicing this fashion is manageable so long as you've got reached the proper tools.


Related Keywords:

Caitlin Smart

Mock Turtle exclaims, "Go on, old fellow!" 'Don't worry about it the whole day!' Since she'd left, he'd been going on for quite some time.